SILVERTOWN OIL ATOMISER (RIGHT HAND FEED) (one supplied) - 4 WAY (O Gauge 7mm scale)

This is a 3D printed 4 way locomotive atomiser, with right hand feed, in O Gauge, 7mm scale. The atomiser includes the support bracket and hexagon pipe fittings, ready to accept the feed pipes.

The photos are of an example of the finished item as you will receive it. These are genuine photos taken with a full frame 35mm SLR and not digital representations. You simply need to remove the small amount of flash from the base, clear the holes in the hexagon fittings for the pipework (using either a 0.4mm or 0.5mm drill bit) and it is ready to paint / fit. 

Silvertown lubricators are also available to complement this, available in 4, 8 and 16 feed versions (all listed separately).

Bear in mind the size of these items when looking at the detail in the photos. This main section of the atomiser including the bracket is 7.3mm long and 5.7mm high.

This part was commissioned by a customer building an LMS Mogul, requiring a 4 way atomiser to accompany the 8 feed silvertown lubricators on the footplate.