This is a 3D printed item, using a fine ABS like resin.
The photos are of an example of the finished item as you will receive it (one lubricator will be supplied). These are genuine photos taken with a full frame 35mm SLR and not digital representations.
You simply need to remove the print supports from under the side pipe nuts, lightly sand the circumference of the ratchet wheel, clear the holes in the hexagon fittings for the pipework and it is ready to paint / fit. The manual priming handle is separate and can be mounted on either end depending on the application.
Two versions of the lubricators are available, with either a the cast "cylinder" or "axlebox" plate above the "SILVERTOWN". They are also available in 8 and 16 feed versions, along with a 6 way atomiser (see separate listings).
Bear in mind the size of these items when looking at the detail in the photos. This lubricator main housing is 22.8mm long, 13.9mm wide and 17.7mm high (excluding the ratchet wheel and priming handle).
These parts were commissioned by an enthusiast who liked the O Gauge versions and wanted the hex pipe nuts, "SILVERTOWN" wording on the lid and there is even the drain plug!!
Please ask if you have any questions, need more than are listed or want a special variation on this theme.
