SILVERTOWN LUBRICATOR 8 or 12 FEED (one supplied) (5" Gauge 1/12 scale)

This is a 3D printed item, using a fine ABS like resin.

The photos are of an example of the finished items as you will receive them (one lubricator will be supplied). These are genuine photos and not digital representations.

 

You simply need to lightly sand the circumference of the ratchet wheel and it is ready to paint / fit. The manual priming handle is separate and a hole is provided in the main housing for this. Alternatively, the spindle can shortened and it can be mounted on the front of the lubricator, depending on the application.

Two versions of the lubricators are available, a 12-feed and an 8-feed. Each is available with either the cast "Axlebox" or "Cylinder" plate above the "SILVERTOWN" logo.

Bear in mind the size of these items when looking at the detail in the photos. The lubricator main housing is 32.0mm long (12 feed), 23.5mm long (8 feed), 22.8mm wide and 24.0mm high (excluding the ratchet wheel, pipe connectors and priming handle).

These parts were commissioned by an enthusiast who liked the O Gauge versions and wanted the hex pipe nuts, "SILVERTOWN" wording on the lid and even the drain plug!!