This is a 3D printed item, using a fine ABS like resin.
The photos are of an example of the item as you will receive them and also show the components assembled and fitted to a Tri-ang Big Big Train Hymek Class 35 from the 1960's (courtesy of a happy customer who had been looking for one of these to fill the void in the cab).
You will receive a set of two cab interiors (one for each end)... enough to complete one locomotive, creating a beautifully authentic interior.
These are genuine photos and not digital representations like on some sites. You simply need to clip the brake wheel off the sprue, open up the hole in the front panel with a 1.5mm drill and lightly sand the base edges of the main unit. After painting, all that is required is to secure the two seats to the floor and the brake wheel to the front panel with superglue. The complete assembly will then slot nicely into the cab of a Tri-ang Big Big Train Hymek. No further adjustment or glue should be required as refitting the cab top secures the interior into place.
Bear in mind the size of these items when looking at the detail in the photos. Some of the detail is very hard to see with the naked eye.
These parts were commissioned originally to add detail to the Tri-ang Big Big Train Hymek Class 35 diesel, but might also be suitable for other Hymek diesel locomotives.
Please ask if you have any questions or if you need more items than are currently listed.
