This is a 3D printed item, using a fine ABS like resin.
The 1st photo is of the item parts as you will receive them (you receive parts to complete two cab interiors). The next photos show the interiors fitted to a Lima Class 33 diesel locomotive (the loco and side-frame upgrades are not included in the sale).
These parts were designed to upgrade the Lima Class 33 and add a much needed cab interior and partitions to the locomotive. The kit comprises of two control consoles, four seats and two sets of partitions. The partitions have been designed to fit into the locomotive chassis without any modification required.
The upgrade does however require the plate holding the bogie traction weights to be unscrewed to make room for the partitions. The weights can then be repositioned behind the partition (see photos).
You will receive two sets of parts to complete the modification to both cabs... enough to upgrade one Lima Class 33 locomotive.
These are genuine photos and not digital representations.
To fit the kit you simply need to remove a small amount of flash from the bottom edges of the partitions and fix them to the floor, aligning them centrally with the body locating lugs on the chassis / doors on the body. The seats fit onto the locating lugs on the face of the partitions and the consoles fit into the recesses in the front of the chassis floor. Everything is therefore easy to align. The body then slots back over the chassis in the normal way.
The console is as close to the real thing as i think it is possible to get, with all the switches, dials and controls in their place.
Bear in mind the size of these items when looking at the detail in the photos.
These parts were commissioned by a customer who wanted to give the Lima Class 33 a more complete look, after having fitted the upgraded bogie side-frame kit (available separately).
Please ask if you have any questions.
