WAKEFIELD LUBRICATOR (two supplied) - for LMS CRAB / MOGUL (O Gauge 7mm scale)

This is a 3D printed item, using a fine ABS like resin.

The photos are of an example of the finished items as you will receive them (two lubricators will be supplied). These are genuine photos taken with a full frame 35mm SLR and not a digital representation. 

You simply need to check that the base is flat (may require light sanding), lightly sand the circumference of the ratchet wheel, clear the holes in the hexagon fittings for the pipework (using either a 0.4mm or 0.5mm drill bit) and it is ready to paint / fit. The actuating lever on the ratchet wheel extends below the base of the lubricator so that this can be located to pass through a slot in the footplate... if you have modelled one.

Bear in mind the size of these items when looking at the detail in the photos. This lubricator main housing is 7.9mm long, 5.0mm wide and 8.4mm high (10.9mm long including the ratchet and flushing handle).

These parts were commissioned by an enthusiast who liked the other Wakefield lubricators and wanted a pair for an LMS Crab he was building.