STONES COACH DYNAMO (SET OF 3) - STANDARD TYPE - LNER (OO Gauge 4mm scale)

This is a 3D printed item, using a fine ABS like resin.

The dynamos are supplied complete with the suspension bracket and tension adjuster. An adjuster is provided on both sides of the dynamo bracket to allow for the dynamos to be fitted as opposite pairs at one end of the coach... as used on the restaurant cars.

The first photo is of an example of the set of three as you will receive it. The remainder are of the individual dynamo removed from the base, ready for the tension adjuster to be cut off as required for either a left hand or right hand fitting. These are genuine photos taken with a full frame 35mm SLR and not digital representations.

You simply need to remove each of the 3 assemblies from the base, file the top of the pulley and the edge of the base plate smooth and then remove whichever tension adjuster is not required. They are then ready to paint / fit.

Bear in mind the size of these items when looking at the detail in the photos.

This dynamo is 11.5mm long and 4.3mm diameter (excluding the brackets and connectors).

These parts were commissioned by someone who liked the O gauge versions and wanted some in 4mm. I also have listings for the heavy duty dynamos.