This is a 3D printed item, using a fine ABS like resin and is for a set of parts to complete 2 bogies (2750mm wheelbase) for the Plan U Trailer car.
You will receive:
1) Unpowered bogie with Track Fender - supplied with a pivot assembly (Motorloos Draaistel met Baanschuiver)
2) Unpowered bogie without Track Fender - supplied with a pivot assembly (Motorloss Draaistel zonder Baanschuiver)
The bogies will require wheels to complete (not supplied) and each pivot assembly requires two 15mm lengths of 2mm brass rod (not supplied).
The above unpowered bogies can also be used with the Mat 64 Plan T 4 car and Plan V two car Electric trains
(De boven twee motorloss draaistel kan worden gebruikt met de Mat 64 Plan T 4 rijtuig en Plan V 2 rijtuig elektrische treinen)
These bogies were commissioned by a Dutch railway enthusiast to complete a Plan U power car, coach and trailer car (the 3000mm power car bogies are listed separately).
The first 6 photos are of an example of the items as you will receive them. These are genuine photos taken with a full frame 35mm SLR and not digital representations like on some sites.
You simply need to remove the base from the side frames, file / sand the top edge flat and they are ready to assemble to the ends, pivot and then paint / fit.
The last 3 photos are of an assembled trailer car bogie as an example of the finished article (note brass pivot rods and wheels not supplied).
Bear in mind the size of these items when looking at the detail in the photos.
This side frame is 95mm long (excluding the track fender).
Please ask if you have any questions or if you need more than are listed.
