SILVERTOWN OIL ATOMISERS (RIGHT & LEFT HAND FEED supplied) - 6 FEED (OO Gauge 4mm scale)

This is a 3D printed item, using a fine ABS like resin.

The photos are of an example of the finished items as you will receive them (one 6 way atomiser fed from the right side and one 6 way atomiser fed from the left side will be supplied) in OO Gauge 4mm scale. These are genuine photos taken with a full frame 35mm SLR and not digital representations. You simply need to remove the small amount of flash from the base, clear the holes in the hexagon fittings for the pipework (using either a 0.3mm or 0.4mm drill bit) and it is ready to paint / fit. 

Silvertown lubricators are also available to complement this, available in 4, 8 and 16 feed versions (all listed separately).

Bear in mind the size of these items when looking at the detail in the photos. This main section of the atomiser including the bracket is 5.1mm long and 3.2mm high.

These parts were commissioned from an enthusiast who was distressed by the number of drill bits that were getting broken when drilling through brass or whitemetal lubricators. The added bonus was this atomiser to complement them.