Skip to product information
1 of 2

SR Bullied West Country Locomotive Brake Hanger set BR (O Gauge 7mm scale)

SR Bullied West Country Locomotive Brake Hanger set BR (O Gauge 7mm scale)

Regular price £12.50
Regular price Sale price £12.50
Sale Sold out
Tax included.

This is a 3D printed set of brake hangers and brackets for the Southern Railway West Country Light Pacific locomotive in O Gauge (7mm scale).

These parts were commissioned by a customer who wanted to deal with the problem of the brake hangers causing short circuits between the chassis and the wheels. The set comprises of:

  • Front brake actuating adjuster bracket (x2)
  • Double brake assembly between front and centre driving wheels (narrow gap) (x2)
  • Double brake assembly between centre and rear driving wheels (wider gap) (x2)
  • Single rear brake hanger (x2)
  • Top pivot / support brackets for the double brake hangers (x2 LH and x2 RH)

The pivot brackets are separate from the double brake hangers to allow the brake hangers to be angled to fit the particular locomotive kit, allowing adequate clearance between the wheels. A length of 1.0mm diameter brass rod (not supplied) is required to fit the double brake hangers to the pivot / support brackets.

The photos show the component parts as they will be supplied, before any clean up. The photos were taken with a full frame 35mm SLR and are not digital representations.

The hangers have 1.0mm pilot holes for the brake rods and support pivots and should be drilled out to the appropriate size.

Please ask if you have any questions or if you need more or less than are listed.

View full details